Multi-Wax-Spray is an anti-corrosion agent for area coating and for the protection
of cavities, containing mild smelling solvents.
It is a thin, slightly thixotropic spray which atomizes easily. The anti-corro-sion
agent is bitumen free and has a strong neutralisation power and thus good acid
binding capacity.The product contains a high proportion of rust inhibitors. The
polymer portion leads to high toughness and relative high abrasion resistance
compared to other wax products.
Multi-Wax-Spray is very finely atomized on spraying, has outstanding creep qualities,
penetrates well into the spaces to be protected (eg welds) and yet does not run
excessively from the bottom of such a joints. Creep qualities are optimal if the
product and the bodywork are at room temperature. When fully dry, the anti-corrosion
agent forms a tough, plastic, water-repellent film of transparent thin layers.
The aerosol can is equipped with two spray heads: one spray head with a tube,
one spray head with a slit nozzle for area coating.
Multi-Wax-Spray is used in workshops primarily as conservation wax for preventive
protection and for care and repair.
With the new type of fan jet spraying head underbodies of cars can be evenly coated
with a wide spread jet.
The attached round jet spraying head with tube allows spraying in cavities on
cars, eg doors, motor, hoods, trunk lids and areas difficult to reach.
Multi-Wax-Spray is suitable for spraying the interior of open cavities, in addition
to existing cavity conservation of new vehicles and follow-up treatment after
accident repairs. The product is ideal for corrosion protection on sheet metal
and steel parts, eg fuel tanks, brake tubes or tubes of the power assisted steering.
Screw connections at gearbox cross-rails and engine suspensions can also be coated
with this transperent protection film.
The thread is thus protected and will enable secure screwing.
On modern cars Multi-Wax-Spray completes the factory coating on transitions, under
plastic hoods, in the weal houses and under the fenders.
The splash water resistant film permanently protects concealed body areas.
Body seams under bumpers which are no longer caulked in the factory can be securely
Multi-Wax-Spray is particularly suitable for long term protection of immobilized
vehicles. The product is also used for the conservation of seams, areas and cavities
on vehicles and rust endangered spots in the engine compartment.